Polarizing Beamsplitter Prisms — HCBS2 Series
From $198 USD
Request a quoteProduct description
HCBS2 polarizing beamsplitter cubes use a polarizing film sealed within a cemented prism assembly. The source describes P-polarized light as transmitted and S-polarized light as reflected at 90° under the intended incidence condition. At 45° incidence, the source says extended alignment is not required.
Each model specifies transmission, reflection and extinction-ratio performance. Use the selected model values for its wavelength and coating details. The source drawing is for reference only and must not be used for fabrication.
Schematic
Reference drawing only; actual products may vary. Do not use the drawing for fabrication.
General specifications
Common specifications apply to this series. Model-specific values are listed below; fields missing from the source model remain blank.
- Substrate material
- H-ZF3
- Surface figure
- λ/10 @ 632.8 nm
- Surface quality
- 60-40
- Clear aperture
- >80%
- Size tolerance
- ±0.2 mm
- Edge finish
- Protective bevel
- Transmitted-beam deviation
- ±5 arcmin
- Reflected-beam deviation
- 90° ±5 arcmin
- Transmittance
- Tp >90%
- Reflectance
- Rs >99.5%
- Extinction ratio
- Tp/Ts >1000:1
- Coating description
- Beamsplitting coating on the hypotenuse (S3); broadband anti-reflection coatings on right-angle faces (S1, S2, S4, S5)
Available specifications
USD unit prices. Shipping, taxes and dispatch timing are confirmed with your quotation. Select models and quantities to build your quote list.
29 models
Choose comparison fields
Compare up to four fields. Expand a model to read every specification.
| Details | Quote | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| HCBS2-005-VIS | H-ZF3 | 5 × 5 × 5mm | Average reflectance <0.5% @420–680 nm | Tp/Ts >1000:1 | VIS AR coating: Ravg <0.5% @420–680 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $198 | ||
| HCBS2-010-VIS | H-ZF3 | 10 × 10 × 10mm | Average reflectance <0.5% @420–680 nm | Tp/Ts >1000:1 | VIS AR coating: Ravg <0.5% @420–680 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $219 | ||
| HCBS2-012-VIS | H-ZF3 | 12.7 × 12.7 × 12.7mm | Average reflectance <0.5% @420–680 nm | Tp/Ts >1000:1 | VIS AR coating: Ravg <0.5% @420–680 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $219 | ||
| HCBS2-015-VIS | H-ZF3 | 15 × 15 × 15mm | Average reflectance <0.5% @420–680 nm | Tp/Ts >1000:1 | VIS AR coating: Ravg <0.5% @420–680 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $219 | ||
| HCBS2-020-VIS | H-ZF3 | 20 × 20 × 20mm | Average reflectance <0.5% @420–680 nm | Tp/Ts >1000:1 | VIS AR coating: Ravg <0.5% @420–680 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $240 | ||
| HCBS2-025-VIS | H-ZF3 | 25.4 × 25.4 × 25.4mm | Average reflectance <0.5% @420–680 nm | Tp/Ts >1000:1 | VIS AR coating: Ravg <0.5% @420–680 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $261 | ||
| HCBS2-030-VIS | — | 30 × 30 × 30mm | 420–680 nm | >1000:1 | — | — | $625 | ||
| HCBS2-050-VIS | H-ZF3 | 50 × 50 × 50mm | Average reflectance <0.5% @420–680 nm | Tp/Ts >1000:1 | VIS AR coating: Ravg <0.5% @420–680 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $938 | ||
| HCBS2-005-NIR | H-ZF3 | 5 × 5 × 5mm | Average reflectance <0.5% @620–1000 nm | Tp/Ts >1000:1 | NIR AR coating: Ravg <0.5% @620–1000 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $219 | ||
| HCBS2-010-NIR | H-ZF3 | 10 × 10 × 10mm | Average reflectance <0.5% @620–1000 nm | Tp/Ts >1000:1 | NIR AR coating: Ravg <0.5% @620–1000 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $219 | ||
| HCBS2-012-NIR | H-ZF3 | 12.7 × 12.7 × 12.7mm | Average reflectance <0.5% @620–1000 nm | Tp/Ts >1000:1 | NIR AR coating: Ravg <0.5% @620–1000 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $219 | ||
| HCBS2-015-NIR | H-ZF3 | 15 × 15 × 15mm | Average reflectance <0.5% @620–1000 nm | Tp/Ts >1000:1 | NIR AR coating: Ravg <0.5% @620–1000 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $240 | ||
| HCBS2-020-NIR | H-ZF3 | 20 × 20 × 20mm | Average reflectance <0.5% @620–1000 nm | Tp/Ts >1000:1 | NIR AR coating: Ravg <0.5% @620–1000 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $261 | ||
| HCBS2-025-NIR | H-ZF3 | 25.4 × 25.4 × 25.4mm | Average reflectance <0.5% @620–1000 nm | Tp/Ts >1000:1 | NIR AR coating: Ravg <0.5% @620–1000 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $261 | ||
| HCBS2-050-NIR | H-ZF3 | 50 × 50 × 50mm | Average reflectance <0.5% @620–1000 nm | Tp/Ts >1000:1 | NIR AR coating: Ravg <0.5% @620–1000 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $1,146 | ||
| HCBS2-005-SWIR1 | H-ZF3 | 5 × 5 × 5mm | Average reflectance <0.5% @900–1300 nm | Tp/Ts >1000:1 | SWIR1 AR coating: Ravg <0.5% @900–1300 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $219 | ||
| HCBS2-010-SWIR1 | H-ZF3 | 10 × 10 × 10mm | Average reflectance <0.5% @900–1300 nm | Tp/Ts >1000:1 | SWIR1 AR coating: Ravg <0.5% @900–1300 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $219 | ||
| HCBS2-012-SWIR1 | H-ZF3 | 12.7 × 12.7 × 12.7mm | Average reflectance <0.5% @900–1300 nm | Tp/Ts >1000:1 | SWIR1 AR coating: Ravg <0.5% @900–1300 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $219 | ||
| HCBS2-015-SWIR1 | H-ZF3 | 15 × 15 × 15mm | Average reflectance <0.5% @900–1300 nm | Tp/Ts >1000:1 | SWIR1 AR coating: Ravg <0.5% @900–1300 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $240 | ||
| HCBS2-020-SWIR1 | H-ZF3 | 20 × 20 × 20mm | Average reflectance <0.5% @900–1300 nm | Tp/Ts >1000:1 | SWIR1 AR coating: Ravg <0.5% @900–1300 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $261 | ||
| HCBS2-025-SWIR1 | H-ZF3 | 25.4 × 25.4 × 25.4mm | Average reflectance <0.5% @900–1300 nm | Tp/Ts >1000:1 | SWIR1 AR coating: Ravg <0.5% @900–1300 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $261 | ||
| HCBS2-050-SWIR1 | H-ZF3 | 50 × 50 × 50mm | Average reflectance <0.5% @900–1300 nm | Tp/Ts >1000:1 | SWIR1 AR coating: Ravg <0.5% @900–1300 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $1,146 | ||
| HCBS2-005-SWIR2 | H-ZF3 | 5 × 5 × 5mm | Average reflectance <0.5% @1200–1600 nm | Tp/Ts >1000:1 | SWIR2 AR coating: Ravg <0.5% @1200–1600 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $219 | ||
| HCBS2-010-SWIR2 | H-ZF3 | 10 × 10 × 10mm | Average reflectance <0.5% @1200–1600 nm | Tp/Ts >1000:1 | SWIR2 AR coating: Ravg <0.5% @1200–1600 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $219 | ||
| HCBS2-012-SWIR2 | H-ZF3 | 12.7 × 12.7 × 12.7mm | Average reflectance <0.5% @1200–1600 nm | Tp/Ts >1000:1 | SWIR2 AR coating: Ravg <0.5% @1200–1600 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $219 | ||
| HCBS2-015-SWIR2 | H-ZF3 | 15 × 15 × 15mm | Average reflectance <0.5% @1200–1600 nm | Tp/Ts >1000:1 | SWIR2 AR coating: Ravg <0.5% @1200–1600 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $240 | ||
| HCBS2-020-SWIR2 | H-ZF3 | 20 × 20 × 20mm | Average reflectance <0.5% @1200–1600 nm | Tp/Ts >1000:1 | SWIR2 AR coating: Ravg <0.5% @1200–1600 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $240 | ||
| HCBS2-025-SWIR2 | H-ZF3 | 25.4 × 25.4 × 25.4mm | Average reflectance <0.5% @1200–1600 nm | Tp/Ts >1000:1 | SWIR2 AR coating: Ravg <0.5% @1200–1600 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $261 | ||
| HCBS2-050-SWIR2 | H-ZF3 | 50 × 50 × 50mm | Average reflectance <0.5% @1200–1600 nm | Tp/Ts >1000:1 | SWIR2 AR coating: Ravg <0.5% @1200–1600 nm | Tp >90%; Rs >99.5% Tp/Ts >1000:1 | $1,146 | ||
No matching models. Change or clear your filters.
Curves

Technical notes
Select a model and quantity for an itemized quotation.
Review the material, dimensions and other specifications listed for the individual model. Check any available curves against the model's stated operating range.
Illustrations and printable specification summaries are reference information, not manufacturing drawings. Confirm technical suitability and final requirements with your quotation.
Quote list
Choose models and quantities above. Your list is saved in this browser and can include models from other product categories.
This form requires JavaScript. If it is unavailable, email phoslens@phoslens.com.