Interference Filters
Compare the HNIF narrowband family, which includes 10 nm and 20 nm FWHM models, with the HBF interference-filter families. Begin with center wavelength and bandwidth, then check the blocking region and aperture needed by your source, detector and optical layout.
Choosing Interference Filters
- Specify center wavelength and acceptable bandwidth together; filters with the same center can serve different measurement tasks.
- Identify unwanted wavelengths and required rejection, including any source lines outside the passband.
- Check incidence angle and beam geometry when reviewing spectral data, and compare the model diameter with the usable beam aperture.
Read spectral information with its measurement conditions in the optical-curves guide.