Zinc Selenide Infrared Broadband Wedge Beamsplitters — HBS71 Series
From $282 USD
Request a quoteProduct description
HBS71 infrared wedge beamsplitters use zinc selenide (ZnSe). The actual models cover 7–14 µm, with a 50R/50T splitting ratio and nominal 30 arcmin wedge angle. They are designed for 45° incidence.
The source description refers to a rear antireflection coating, but every listed model specifies S2 as uncoated. The model specifications below take precedence.
Source handling notice: ZnSe is described as a hazardous material. Wear gloves, avoid direct contact and wash hands after handling.
General specifications
Source common parameters apply to this series. Selected model thickness, wavelength and coating values take precedence.
- Substrate material
- Zinc selenide (ZnSe)
- Surface figure
- λ/4 @632.8 nm
- Surface quality
- 60-40
- Clear aperture
- >90%
- Size tolerance
- +0.0/-0.25 mm
- Thick-edge thickness tolerance
- ±0.25 mm
- Wedge angle
- 30 arcmin ±10 arcmin
- Edge finish
- Protective bevel 0.2–0.5 mm ×45°
- Coating note
- Designed for 45° incidence
Available specifications
USD unit prices. Shipping, taxes and dispatch timing are confirmed with your quotation. Select models and quantities to build your quote list.
3 models
Choose comparison fields
Compare up to four fields. Expand a model to read every specification.
| Details | Quote | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HBS71-012-50-IR | Zinc selenide (ZnSe) | Source states compliance; not independently verified | Φ12.7mm | 3mm | 50R/50T | 30 arcmin±10 arcmin | Splitting ratio(50%R/50%T)±10% @7–14µm | Uncoated | @7–14μm | $282 | ||
| HBS71-025-50-IR | Zinc selenide (ZnSe) | Source states compliance; not independently verified | Φ25.4mm | 5mm | 50R/50T | 30 arcmin±10 arcmin | Splitting ratio(50%R/50%T)±10% @7–14µm | Uncoated | @7–14μm | $428 | ||
| HBS71-050-50-IR | Zinc selenide (ZnSe) | Source states compliance; not independently verified | Φ50.8mm | 8mm | 50R/50T | 30 arcmin±10 arcmin | Splitting ratio(50%R/50%T)±10% @7–14µm | Uncoated | @7–14μm | $1,355 | ||
No matching models. Change or clear your filters.
Curves

Technical notes
Select a model and quantity for an itemized quotation.
Review the material, dimensions and other specifications listed for the individual model. Check any available curves against the model's stated operating range.
Illustrations and printable specification summaries are reference information, not manufacturing drawings. Confirm technical suitability and final requirements with your quotation.
Quote list
Choose models and quantities above. Your list is saved in this browser and can include models from other product categories.
This form requires JavaScript. If it is unavailable, email phoslens@phoslens.com.