HDSM025 D-Shaped Mirrors
From $46 USD
Request a quoteProduct description
HDSM025 D-shaped mirrors can be used to separate beams with very small spacing. The reflective-coating edge is less than 0.05 mm from the mirror’s straight edge. The back of the straight edge is cut away to help prevent the mirror from blocking the unselected beam. A D-shaped mirror is described as suitable for selecting one beam from two closely spaced beams.
HDSM025 mirrors offer metal and dielectric coatings for angles of incidence from 0° to 45°.
The eight models offer dielectric coating bands of 300–320 nm, 400–750 nm, 750–1100 nm and 1280–1600 nm, plus UV aluminum, protected aluminum, protected silver and protected gold. Select the model-specific coating, reflectance, substrate and surface finish listed below.
D-shaped mirror dimension schematic
Original diameter, thickness, S1/S2 and rear-cut geometry preserved. Reference drawing only.
The second dielectric reference chart is labeled 450–700 nm, while HDSM025-450 specifies 400–750 nm. The fourth reference chart plots transmittance; its axis and data are retained. Use model-specific specifications for selection and request a manufacturing drawing before integration.
General specifications
General HDSM025 specifications; model-specific substrate, coating and rear-surface finish take precedence.
- Material
- K9 optical glass / fused silica
- Surface figure
- λ/10 @632.8 nm
- Reflective surface quality
- 10-5
- Surface quality
- 60-40
- Diameter
- 25.4 mm
- Thickness
- 6 mm
- Diameter tolerance
- +0.0/-0.2 mm
- Thickness tolerance
- ±0.2 mm
- Parallelism
- <3 arcmin
- Angle of incidence
- 0° to 45°
- S1 coating
- Reflective coating on S1 only
- S2 surface
- Fine ground or polished
Available specifications
USD unit prices. Shipping, taxes and dispatch timing are confirmed with your quotation. Select models and quantities to build your quote list.
8 models
Choose comparison fields
Compare up to four fields. Expand a model to read every specification.
| Details | Quote | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| HDSM025-300 | Fused silica | 25.4mm | 6mm | 0°~45° | Dielectric coating: Ravg>99%@300-320nm | Polished | $205 | ||
| HDSM025-450 | K9 optical glass | 25.4mm | 6mm | 0°~45° | Dielectric coating D02: Ravg>99.5%@400-750nm | Ground | $165 | ||
| HDSM025-750 | K9 optical glass | 25.4mm | 6mm | 0°~45° | Dielectric coating D03: Ravg>99.5%@750-1100nm | Ground | $165 | ||
| HDSM025-1280 | K9 optical glass | 25.4mm | 6mm | 0°~45° | Dielectric coating D04: Ravg>99.5%@1280-1600nm | Ground | $165 | ||
| HDSM025-UVAL | K9 optical glass | 25.4mm | 6mm | 0°~45° | UV aluminum: Ravg>87%@400-1200nm | Ground | $46 | ||
| HDSM025-AL | K9 optical glass | 25.4mm | 6mm | 0°~45° | Protected aluminum: Ravg>92%@400-1200nm | Ground | $81 | ||
| HDSM025-AG | K9 optical glass | 25.4mm | 6mm | 0°~45° | Protected silver: Ravg>95%@400-12000nm | Ground | $81 | ||
| HDSM025-AU | K9 optical glass | 25.4mm | 6mm | 0°~45° | Protected gold: Ravg>98%@1064-20000nm | Ground | $88 | ||
No matching models. Change or clear your filters.
Curves

Technical notes
D is the mirror diameter and T is the thickness. The reference schematic shows a 30° rear-edge cut; this geometric angle is separate from the model angle of incidence.
Review the material, dimensions and other specifications listed for the individual model. Check any available curves against the model's stated operating range.
Illustrations and printable specification summaries are reference information, not manufacturing drawings. Confirm technical suitability and final requirements with your quotation.
Quote list
Choose models and quantities above. Your list is saved in this browser and can include models from other product categories.
This form requires JavaScript. If it is unavailable, email phoslens@phoslens.com.