Zinc Selenide (ZnSe) Plane Windows — GWH71 Series
From $136 USD
Request a quoteProduct description
GWH71 plane windows use zinc selenide (ZnSe). The complete table contains 12 models: six uncoated and six with an IR2 antireflection coating.
Actual diameters range from 12.5 to 50 mm, with thicknesses of 3 or 5 mm. The IR2 model specifications state Ravg<1.5% at 8–12 μm. General surface figure, parallelism and dimensional tolerances below belong to this source series.
The original transmission reference uses a 10 mm thick sample, which differs from the listed model thicknesses. It is followed by the IR2 coating reflectance reference. Illustrations are reference views, not machining drawings.
Schematic
Dimensions in mm unless otherwise stated.
General specifications
General specifications belong to this source series only. Individual model dimensions and coatings take precedence.
- Material
- Zinc selenide(ZnSe)
- Surface figure
- 1λ @ 633nm
- Surface quality
- 40-20
- Parallelism
- <1 arcmin
- Diameter tolerance
- +0.0/-0.1mm
- Thickness tolerance
- ±0.1mm
- Edge bevel
- Protective bevel 0.2mm×45°
- RoHS
- Conforms to the standard
Available specifications
USD unit prices. Shipping, taxes and dispatch timing are confirmed with your quotation. Select models and quantities to build your quote list.
12 models
Choose comparison fields
Compare up to four fields. Expand a model to read every specification.
Dia. = diameter. Units remain shown in each heading.
| Details | Quote | ||||||
|---|---|---|---|---|---|---|---|
| GWH71-012 | Zinc selenide(ZnSe) | 12.5 | 3 | Uncoated | $136 | ||
| GWH71-012A | Zinc selenide(ZnSe) | 12.7 | 3 | Uncoated | $136 | ||
| GWH71-025 | Zinc selenide(ZnSe) | 25 | 5 | Uncoated | $240 | ||
| GWH71-025A | Zinc selenide(ZnSe) | 25.4 | 5 | Uncoated | $240 | ||
| GWH71-040 | Zinc selenide(ZnSe) | 40 | 5 | Uncoated | $386 | ||
| GWH71-050 | Zinc selenide(ZnSe) | 50 | 5 | Uncoated | $532 | ||
| GWH71-012-IR2 | Zinc selenide(ZnSe) | 12.5 | 3 | IR2 coating Ravg<1.5%@8-12μm | $198 | ||
| GWH71-012A-IR2 | Zinc selenide(ZnSe) | 12.7 | 3 | IR2 coating Ravg<1.5%@8-12μm | $198 | ||
| GWH71-025-IR2 | Zinc selenide(ZnSe) | 25 | 5 | IR2 coating Ravg<1.5%@8-12μm | $282 | ||
| GWH71-025A-IR2 | Zinc selenide(ZnSe) | 25.4 | 5 | IR2 coating Ravg<1.5%@8-12μm | $282 | ||
| GWH71-040-IR2 | Zinc selenide(ZnSe) | 40 | 5 | IR2 coating Ravg<1.5%@8-12μm | $469 | ||
| GWH71-050-IR2 | Zinc selenide(ZnSe) | 50 | 5 | IR2 coating Ravg<1.5%@8-12μm | $615 | ||
No matching models. Change or clear your filters.
Curves

Technical notes
Review the material, dimensions and other specifications listed for the individual model. Check any available curves against the model's stated operating range.
Illustrations and printable specification summaries are reference information, not manufacturing drawings. Confirm technical suitability and final requirements with your quotation.
Quote list
Choose models and quantities above. Your list is saved in this browser and can include models from other product categories.
This form requires JavaScript. If it is unavailable, email phoslens@phoslens.com.