GSP Linear Polarizers
From $24 USD
Request a quoteProduct description
GSP high-extinction linear polarizers are made from dichroic material cemented between two glass plates. The source describes one orthogonal polarization component as being absorbed more strongly than the other.
The source describes the polarizer as converting natural light into linearly polarized light with a high extinction ratio. Select a model using its listed extinction ratio and wavelength range.
The source notes a wide acceptance angle and larger-aperture options compared with polarizing prisms, and states that this design is not for high-power use. Review each model’s listed damage-threshold values for the transmitted and rejected polarization directions.
Schematic
The source schematic labels diameter ØD and thickness T, shows end markings, and identifies N61 adhesive in the cemented stack. Do not interpret the adhesive as glass material or treat the generic diagram labels as model-specific dimensions.
The source schematic labels diameter ØD and thickness T and identifies N61 adhesive in the cemented stack; these are generic drawing labels, not model-specific dimensions.
The category reference gives an extinction ratio greater than 1000:1, while the model records list 1000:1 for five models and 100:1 for GSP-50B. GSP-25A lists a 3 mm thickness and 20 mm clear aperture; the other models list approximately 2.5 mm thickness and a clear aperture greater than 90%. GSP-25A does not supply surface quality, acceptance angle, single-pass transmittance, or damage threshold; those model fields remain blank. Use the selected model record rather than substituting the category references.
General specifications
These ten values are transcribed from the GSP category table. They are category-level references, not substitutes for absent model fields. Model-specific values remain as supplied and take precedence where they differ.
- Substrate material
- K9 or B270
- Surface quality
- 60-40
- Extinction ratio
- >1000:1
- Clear aperture
- >90%
- Size tolerance
- +0/-0.2 mm
- Acceptance angle
- >20°
- Thickness
- ≈2.5 mm
- Single-pass transmittance for parallel-polarized light
- >70% @ 633 nm
- Wavelength range
- 400–700 nm
- Damage threshold
- Transmitted-polarization direction >10 W/cm²; rejected-polarization direction >1 W/cm²
Available specifications
USD unit prices. Shipping, taxes and dispatch timing are confirmed with your quotation. Select models and quantities to build your quote list.
6 models
Choose comparison fields
Compare up to four fields. Expand a model to read every specification.
| Details | Quote | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GSP-25A | K9 or B270 | Ø25.4 mm | +0/-0.2 mm | 3 mm | ±0.2 mm | 20 mm | 400–700 nm | 1000:1 | — | — | — | — | $41 | ||
| GSP-12 | K9 or B270 | Ø12.7 mm | +0/-0.2 mm | ≈2.5 mm | ±0.2 mm | >90% | 400–700 nm | 1000:1 | 60/40 | >20° | >70% @ 633nm | Transmitted-polarization direction >10 W/cm²; rejected-polarization direction >1 W/cm² | $24 | ||
| GSP-25 | K9 or B270 | Ø25.4 mm | +0/-0.2 mm | ≈2.5 mm | ±0.2 mm | >90% | 400–700 nm | 1000:1 | 60/40 | >20° | >70% @ 633nm | Transmitted-polarization direction >10 W/cm²; rejected-polarization direction >1 W/cm² | $30 | ||
| GSP-30 | K9 or B270 | Ø30 mm | +0/-0.2 mm | ≈2.5 mm | ±0.2 mm | >90% | 400–700 nm | 1000:1 | 60/40 | >20° | >70% @ 633nm | Transmitted-polarization direction >10 W/cm²; rejected-polarization direction >1 W/cm² | $38 | ||
| GSP-50 | K9 or B270 | Ø50.8 mm | +0/-0.2 mm | ≈2.5 mm | ±0.2 mm | >90% | 400–700 nm | 1000:1 | 60/40 | >20° | >70% @ 633nm | Transmitted-polarization direction >10 W/cm²; rejected-polarization direction >1 W/cm² | $104 | ||
| GSP-50B | K9 or B270 | Ø50.8 mm | +0/-0.2 mm | ≈2.5 mm | ±0.2 mm | >90% | 400–700 nm | 100:1 | 60/40 | >20° | >70% @ 633nm | Transmitted-polarization direction >10 W/cm²; rejected-polarization direction >1 W/cm² | $62 | ||
No matching models. Change or clear your filters.
Curves

Technical notes
ceil(CNY/4.5), proposal only; pending root native identity and price readback.
Review the material, dimensions and other specifications listed for the individual model. Check any available curves against the model's stated operating range.
Illustrations and printable specification summaries are reference information, not manufacturing drawings. Confirm technical suitability and final requirements with your quotation.
Quote list
Choose models and quantities above. Your list is saved in this browser and can include models from other product categories.
This form requires JavaScript. If it is unavailable, email phoslens@phoslens.com.