Skip to content
Precision Optics for Engineering & ResearchGlobal B2B Sourcing
PHOSLENS Quote List
Menu
All Products
Product families
Custom RequirementsSelection GuideModel SearchAbout UsQuote List

WPS Single-Plate High-Power Waveplates

From $375 USD

Request a quote

Product description

WPS single-plate high-power waveplates use quartz crystal, as stated in the category specifications and every listed model record.

The eight models specify quarter-wave or half-wave retardance at 355, 532, 1030 or 1064 nm. Each record lists its own plate thickness and order.

The source specifies a Ø20 mm plate, Ø18 mm clear aperture and Ø25.4 × 6 mm housing. The stated damage threshold is >10 J/cm² at 1064 nm, with 20 ns pulses and 20 Hz repetition rate.

Schematic

Dimensions in mm unless otherwise stated.
WPS own optical subjects and unchanged technical geometry

Reference drawings are for reference only and are not manufacturing drawings. The explicit model and category specifications list quartz crystal; conflicting generic material and operating-principle descriptions in the source narrative are not used for these models.

General specifications

These specifications apply to the WPS series. Refer to the model table for the selected wavelength, plate thickness, order and coating.

Substrate material
Quartz crystal
Construction
Single plate
Transmitted wavefront distortion
λ/8 at 632.8 nm
Surface quality
20-10
Retardance accuracy
λ/300
Diameter tolerance (mm)
+0/-0.2 mm
Parallelism
1 arcsec
Acceptance angle (°)
10°
Configuration
Waveplate with housing
Housing dimensions
Ø25.4 × 6 mm
Coating
Double-sided antireflection coating, R<0.25% at center wavelength
Laser-induced damage threshold
>10 J/cm², 20 ns, 20 Hz, at 1064 nm

Available specifications

USD unit prices. Shipping, taxes and dispatch timing are confirmed with your quotation. Select models and quantities to build your quote list.

8 models

DetailsQuote
WPS2120-355-M25.4Single plateQuartz crystalØ20 mm0.054 mm1+0/-0.2 mm355 nmλ/2λ/300Ø25.4 × 6 mmØ18 mm20-10λ/8 at 632.8 nm1 arcsec10°Double-sided antireflection coating, R<0.25% at 355 nm>10 J/cm², 20 ns, 20 Hz at 1064 nm$375
WPS2120-532-M25.4Single plateQuartz crystalØ20 mm0.029 mm0+0/-0.2 mm532 nmλ/2λ/300Ø25.4 × 6 mmØ18 mm20-10λ/8 at 632.8 nm1 arcsec10°Double-sided antireflection coating, R<0.25% at 532 nm>10 J/cm², 20 ns, 20 Hz at 1064 nm$375
WPS2120-1030-M25.4Single plateQuartz crystalØ20 mm0.059 mm0+0/-0.2 mm1030 nmλ/2λ/300Ø25.4 × 6 mmØ18 mm20-10λ/8 at 632.8 nm1 arcsec10°Double-sided antireflection coating, R<0.25% at 1030 nm>10 J/cm², 20 ns, 20 Hz at 1064 nm$375
WPS2120-1064-M25.4Single plateQuartz crystalØ20 mm0.061 mm0+0/-0.2 mm1064 nmλ/2λ/300Ø25.4 × 6 mmØ18 mm20-10λ/8 at 632.8 nm1 arcsec10°Double-sided antireflection coating, R<0.25% at 1064 nm>10 J/cm², 20 ns, 20 Hz at 1064 nm$375
WPS4120-355-M25.4Single plateQuartz crystalØ20 mm0.027 mm1+0/-0.2 mm355 nmλ/4λ/300Ø25.4 × 6 mmØ18 mm20-10λ/8 at 632.8 nm1 arcsec10°Double-sided antireflection coating, R<0.25% at 355 nm>10 J/cm², 20 ns, 20 Hz at 1064 nm$375
WPS4120-532-M25.4Single plateQuartz crystalØ20 mm0.043 mm1+0/-0.2 mm532 nmλ/4λ/300Ø25.4 × 6 mmØ18 mm20-10λ/8 at 632.8 nm1 arcsec10°Double-sided antireflection coating, R<0.25% at 532 nm>10 J/cm², 20 ns, 20 Hz at 1064 nm$375
WPS4120-1030-M25.4Single plateQuartz crystalØ20 mm0.029 mm0+0/-0.2 mm1030 nmλ/4λ/300Ø25.4 × 6 mmØ18 mm20-10λ/8 at 632.8 nm1 arcsec10°Double-sided antireflection coating, R<0.25% at 1030 nm>10 J/cm², 20 ns, 20 Hz at 1064 nm$375
WPS4120-1064-M25.4Single plateQuartz crystalØ20 mm0.03 mm0+0/-0.2 mm1064 nmλ/4λ/300Ø25.4 × 6 mmØ18 mm20-10λ/8 at 632.8 nm1 arcsec10°Double-sided antireflection coating, R<0.25% at 1064 nm>10 J/cm², 20 ns, 20 Hz at 1064 nm$375

Curves

Four complete curve frames in exact order, unchanged scales and plotted data
Typical transmission or coating performance. Refer to the model’s coating range.

Technical notes

Select the specified design wavelength and quarter-wave or half-wave retardance; verify clear aperture, plate thickness, order and housing dimensions.

Review the material, dimensions and other specifications listed for the individual model. Check any available curves against the model's stated operating range.

Illustrations and printable specification summaries are reference information, not manufacturing drawings. Confirm technical suitability and final requirements with your quotation.

Quote list

Choose models and quantities above. Your list is saved in this browser and can include models from other product categories.

This form requires JavaScript. If it is unavailable, email phoslens@phoslens.com.

Let’s discuss your optical requirements.

Choose a model or share what you need.

Scroll to Top
Contact us on WhatsApp