Brewster Isosceles Prisms — BRP Series
From $113 USD
Request a quoteProduct description
BRP prisms allow p-polarized light incident at the Brewster angle to pass through the entrance and exit faces with low reflection. The source also describes monochromatic selection from multi-wavelength lasers.
The two listed standard models use the source material label Quartz, a 69.1° apex angle and an 800 nm design wavelength. The two equal faces are polished; the base is finely ground, and the models are uncoated.
The source angular-accuracy heading uses degrees, while the actual model values are given in arcminutes. The actual values are preserved. The source UVFS reference transmission curve is shown without silently changing the model material label.
Schematic
Dimensions in mm unless otherwise stated.
Illustrations are reference views, not machining drawings. The individual model drawing and specifications take precedence.
General specifications
General specifications apply to this source series. Individual model material, dimensions, angle and coating take precedence.
- Surface figure
- <λ/4@632.8nm
- Surface quality
- 60-40
- Dimension tolerance
- +0/-0.2mm
- Angle tolerance
- <5 arcmin
- Polished surfaces
- Two equal faces polished; base finely ground
- Clear aperture
- >90%
- Edge bevel
- Protective bevel <0.5mmx45°
- Surface coating
- Uncoated; coating available upon request
Available specifications
USD unit prices. Shipping, taxes and dispatch timing are confirmed with your quotation. Select models and quantities to build your quote list.
2 models
Choose comparison fields
Compare up to four fields. Expand a model to read every specification.
Dia. = diameter. Units remain shown in each heading.
| Details | Quote | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| BRP1112 | Quartz | 69.1° | 12.7 | 12.7 | 800nm | <3 arcmin | Two equal faces polished; base finely ground | Uncoated | $113 | ||
| BRP1125 | Quartz | 69.1° | 25.4 | 25.4 | 800nm | <3 arcmin | Two equal faces polished; base finely ground | Uncoated | $163 | ||
No matching models. Change or clear your filters.
Curves

Technical notes
Review the material, dimensions and other specifications listed for the individual model. Check any available curves against the model's stated operating range.
Illustrations and printable specification summaries are reference information, not manufacturing drawings. Confirm technical suitability and final requirements with your quotation.
Quote list
Choose models and quantities above. Your list is saved in this browser and can include models from other product categories.
This form requires JavaScript. If it is unavailable, email phoslens@phoslens.com.