Skip to content
Precision Optics for Engineering & ResearchGlobal B2B Sourcing
PHOSLENS Quote List
Menu
All Products
Product families
Custom RequirementsSelection GuideModel SearchAbout UsQuote List

Equilateral Dispersive Prisms — ELP Series

From $63 USD

Request a quote

Product description

ELP equilateral prisms separate wavelengths because the substrate refractive index depends on wavelength. The equilateral cross-section has a 60° apex angle.

The seven source models list K9, UV fused silica and ZF13 substrates. The table gives the actual material, dimensions, polished surfaces and coating for each model.

Transmission reference curves are presented in the source order, including the original axis labels and units. Select the curve appropriate to the model material; these curves are not a common performance guarantee.

Schematic

Dimensions in mm unless otherwise stated.
Equilateral Dispersive Prisms geometry, dimension labels and ray paths

Illustrations are reference views, not machining drawings. The individual model drawing and specifications take precedence.

General specifications

General specifications apply to this source series. Individual model material, dimensions, angle and coating take precedence.

Material
K9 / UV / ZF13
Surface figure
<λ/4 @632.8nm
Surface quality
60-40
Dimension tolerance
+0/-0.2mm
Angle tolerance
60°±3 arcmin
Polished surfaces
Three faces polished
Clear aperture
>90%
Edge bevel
Protective bevel <0.5mm×45°

Available specifications

USD unit prices. Shipping, taxes and dispatch timing are confirmed with your quotation. Select models and quantities to build your quote list.

7 models

DetailsQuote
ELP1140UV fused silica60°4040Three faces polishedNone$250
ELP0110K960°1010Three faces polishedNone$63
ELP0112K960°12.712.7Three faces polishedNone$69
ELP0125K960°25.425.4Three faces polishedNone$82
ELP0140K960°4040Three faces polishedNone$167
ELP1112Quartz60°12.712.7Three faces polishedNone$83
ELP1125Quartz60°25.425.4Three faces polishedNone$113

Curves

ELP reference curves
Source reference curves in original order. Material, wavelength and individual model coating take precedence; typical curves are not a performance guarantee.

Technical notes

Review the material, dimensions and other specifications listed for the individual model. Check any available curves against the model's stated operating range.

Illustrations and printable specification summaries are reference information, not manufacturing drawings. Confirm technical suitability and final requirements with your quotation.

Quote list

Choose models and quantities above. Your list is saved in this browser and can include models from other product categories.

This form requires JavaScript. If it is unavailable, email phoslens@phoslens.com.

Let’s discuss your optical requirements.

Choose a model or share what you need.

Scroll to Top
Contact us on WhatsApp